EW-5010A OPERATION MANUAL
and the middle U port are to the right of the discharge direction; (see
Figure 217). Can be replaced by loosening M3-6 bolts .
2-1-10. Confirm the terminal specifications and whether to replace them.
There are three types of terminal guides: 0.5, 0.75, 1.0 square for the
smallest U port, 1.5, 2.5 square for the middle U port, and 4.0 square for
the maximum U port.
2-1-11. and Figure 218 are the terminal guide ring selection. The 6 U
ports of the terminal guide ring are suitable for 0.5, 0.75, 1.0, 1.5, 2.5,
and 4.0 square terminals.
2-1-12. Rotate the terminal guide ring by grasping the screw and pulling
it upward, select a suitable U port, and press it into the card position
again.
To Next Page
Loading...