EW-5010A OPERATION MANUAL
Ⅰ
Interface introduction
1.1 Home screen function introduction
1-1-1. Total production: The quantity counted by the machine during
production operation in automatic mode.
1-1-2. Total reset: reset the total output; the total reset button can be
displayed or closed in the administrator settings interface, but it will be
displayed automatically when the total production reaches the standard.
shut down.
1-1-3. Total setting: The quantity that can be set according to the
production needs (maximum setting value is 32000), and it will prompt
when the quantity produced in the automatic mode arrives.
1-1-4. Production capacity: The machine operates in automatic mode,
(the terminal time is not included when peeling and crimping, because in
To Next Page
Loading...