EASTONTECH EW-5010A - Parameter

EW-5010A OPERATION MANUAL
3
Parameter
Name
Pre insulation terminal crimping machine
Model
EW-5010A
Control mode
human-machine interface, electronic control, pneumatic
control.
Operation mode
Automatic trigger operation and manual operation
Wire size
BVR wire 0.5、0.75、1.0、1.5、2.5、4.0mm2
Terminal size
Insulator length ≤7.5mm, conductor length≤10mm
Stripping length
Max. 17mm
Crimp Shape
Quadrilateral Crimp
Product replacement
Manual replacement of related parts, adjustment of vibration
plate and electric memory adjustment.
Production capacity
2.5s /wire (considered as a single cycle of the machine).
Detection items
terminal presence or absence,right side safety door open
detection.
Power source
External input power AC220V / 50Hz (single-phase) 10A;
internal power DC24V, DC12V
Air source
0.6-0.8Mpa (please use a stable, clean and dry air source, and
keep the air source at least 0.6 Mpa).
Working temperature
10～25℃
Operating humidity
30～80%HR （non-condensing）
Dimensions
W350mm×L450mm×H400mm (excluding protrusions)
weight
40KG