EW-5010A OPERATION MANUAL
Ⅳ
Maintenance
4-1. It is forbidden to blow a certain position of the machine with an air
gun. If it is blown with a wind gun, it may cause a control short circuit or
damage to the mechanical structure. Only use a vacuum cleaner or a rag
to clean.
4-2. Keep the machine box dry and tidy.
4-3. Clean and add butter to the two motor screws regularly (at least
every 15 days and add butter).
4-4. Clean and grease the crimping part of the terminal crimping cylinder
regularly (at least once every 15 days).
4-5. The four-side crimping mechanism should be wiped with a fine cloth
or cotton and alcohol at regular intervals (at least every 15 days).
4-6. Clean and lubricate the other activities regularly (at least once every
30 days).
4-7. When adding butter or lubricating oil above, pay attention to
controlling the amount of refueling. It is not easy, but it must be
comprehensive.
To Previous Page
Loading...
