To Next PageTo Next Page
Need help?Do you have a question about the Easy Lights R160 and is the answer not in the manual?
Provides initial information and guidance for using the manual.
Details how to identify the machine using its nameplate and serial number.
Outlines the terms, conditions, and procedures for the product warranty.
Defines the specific purpose of the machine and prohibits other uses.
Lists fundamental safety regulations and precautions for operating the machine.
Outlines systematic procedures for inspecting components for defects or damage.
Describes daily checks to ensure the machine is in good working order before use.
Outlines functional checks to be performed on machine systems after visual inspection.
Describes the function and operation of the emergency stop buttons for immediate machine shutdown.
Details the microswitches that ensure correct outrigger positioning and limit machine movement.
Details the controls, indicators, and switches located on the ground control panel.
Details the indicators and controls located on the operator's control panel in the cage.
Explains the functions of the control levers used for operating the machine from the cage.
Provides instructions for safely driving the machine onto and off a vehicle using a ramp.
Details the procedure for lifting and securing the machine onto a vehicle using a crane.
Explains how to safely move the machine forwards, backwards, and steer it.
Details the process of stabilizing the machine by extending the outriggers.
Guides the operator on how to enter the cage and perform machine movements safely.
Explains the functions and operation of the optional radio remote control system.
Provides step-by-step instructions for emergency recovery in case of simultaneous power failures.
Lists crucial safety precautions to be followed during all maintenance activities.
Provides a detailed schedule of maintenance tasks based on operating hours.
Explains the lubrication points, procedure, and types of lubricants required.
Details the correct torque values and procedures for tightening various screws and bolts.
Summarizes various checks to be performed on machine components and systems.
Explains the purpose and content of the inspection and maintenance record logbook.
Provides forms for recording initial and subsequent changes in machine ownership.
Provides forms for logging the replacement of machine parts, including details of the old and new components.
General| Brand | Easy Lights |
|---|---|
| Model | R160 |
| Category | Work Light |
| Language | English |
