EasyManua.ls Logo

EasyIO FS Series - User Manual

EasyIO FS Series
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FS Series Modbus Master v1.0
1
EasyIO FS Series
Modbus Master User Guide

Other manuals for EasyIO FS Series

Question and Answer IconNeed help?

Do you have a question about the EasyIO FS Series and is the answer not in the manual?

Summary

Disclaimer and Legal Notices

Confidentiality Notice

Information in this document is confidential and for use by authorized personnel only.

Trademark Notice

Details EasyIO's registered trademarks and third-party trademarks mentioned.

Copyright and Patent Notice

Prohibits unauthorized copying, reproduction, or translation of the document.

FCC Compliance Statements

FCC Interference Statement

Details the equipment's compliance with Class B digital device limits and potential interference.

FCC Caution

Advises on device operation conditions and avoiding harmful interference.

FCC Radiation Exposure Statement

Specifies compliance with FCC limits for uncontrolled environments, requiring 20cm distance.

Introduction to Modbus Master

Prerequisites for Setup

Lists required tools and firmware versions for FS Series setup.

Device Software Configuration Limitations

Details maximum counts for serial networks, devices, and points per device.

Configuring the Modbus Serial Network

Configuring the Modbus TCP Network

Configuring the Modbus TCP Gateway Network

Technical Support Information

Summary

Disclaimer and Legal Notices

Confidentiality Notice

Information in this document is confidential and for use by authorized personnel only.

Trademark Notice

Details EasyIO's registered trademarks and third-party trademarks mentioned.

Copyright and Patent Notice

Prohibits unauthorized copying, reproduction, or translation of the document.

FCC Compliance Statements

FCC Interference Statement

Details the equipment's compliance with Class B digital device limits and potential interference.

FCC Caution

Advises on device operation conditions and avoiding harmful interference.

FCC Radiation Exposure Statement

Specifies compliance with FCC limits for uncontrolled environments, requiring 20cm distance.

Introduction to Modbus Master

Prerequisites for Setup

Lists required tools and firmware versions for FS Series setup.

Device Software Configuration Limitations

Details maximum counts for serial networks, devices, and points per device.

Configuring the Modbus Serial Network

Configuring the Modbus TCP Network

Configuring the Modbus TCP Gateway Network

Technical Support Information

EasyIO FS Series Specifications

General IconGeneral
ProcessorARM Cortex-M4
USB Ports1 x USB 2.0
CommunicationEthernet
ProtocolsBACnet
Power Supply24 VAC/DC
Operating Temperature-20°C to 60°C
Serial Ports1 x RS-485
SeriesEasyIO FS Series

Related product manuals