EasyIO FW Series Installation Guide

EasyIO FW-14– Installation Guide v2.0
17
Step 3
For better wireless reception reposition the antenna. Hold the antenna plastic body to reposition them.
Removing the Top Cover
The procedure below is for FW-14 model.
The procedure is same for FW-08, FW-08V and FW-28
Step 1
Use a Philips screwdriver to unscrew the 2 Philips screws located on top the top cover.
Remove the 2 Button Head Philips screws
Step 2
Hold both end of the top cover to lift up the top cover. Occasionally a small flat head screw driver might
come handy in case the top cover stuck to the bottom cover.
Hold both sides and lift up the top cover

EasyIO FW Series Specifications

General

Brand	EasyIO
Model	FW Series
Category	Controller
Language	English