28
Please make sure to apply blood when the blood drop appears on the display.
5. Gently squeeze and/or
massage your fingertip
until a round drop of blood
on your fingertip.
6. Touch the blood drop at the tip of the
transparent window of the test strip.
Do not put blood on top of the strip.
Be sure to get enough blood on the
strip’s reaction zone. Otherwise, an
inaccurate reading may result.
7. The meter starts to count down
from 5 seconds and then
displays the test result.
8. Push the Strip Ejector to eject
the test strip & dispose of both
strip & lancet properly. Remove
the test strip and the meter
turns off automatically.
Apply blood to the edge of
the test strip.
Do not apply blood on top
of the test strip.
Be sure to get enough blood
on strip to make it to the
confirmation window.
Not enough blood on
strip to get a test result.
To Next Page
Loading...
