Easypix PowerPro VX6430 - First Steps; Step 1: Insert and Charge the Battery

EASYPIX® POWERPRO VX6430 |EN|
12
First steps
To ensure optimum camera performance, please observe
the following steps when using the camera for the first
time:
Step 1: Insert and charge the battery
Before using the camera for the first time, make
sure that it is fully charged.
• Open the battery compartment cover,
insert the battery and charge it.
• Keep the device away from children while charging.
• Make sure that the camera is switched off during
the charging process.
• The camera should only be charged via the USB port
of a computer or a USB power supply unit with
a maximum capacity of 1400mAh.
• Disconnect the USB cable connected to the camera
before using the camera.
NOTE!