Delete
Delete the currently displayed photo or all photos on
the SD card.
Connecting to a computer
By connecting the camera to a computer, you can transfer
the images directly to the computer, charge the camera or
use it as a webcam.
Connect the USB-C port of the camera and the USB port
of the computer using the USB cable supplied. The camera
switches on automatically and the screen shows the
available options.
Press the up/down button to select the desired option
and then press the OK button to confirm the option.
Charging mode
If you select neither MSDC nor PC camera, the camera
is automatically charged only.
MSDC - Mass storage mode
Select "MSDC" to recognise the camera as a drive
on the computer and transfer data.
Note: Data can only be copied from the memory card
to the computer.
To Next Page
Loading...
