English
1. Insert the USB receiver into your PC. Press HOME Button and when
it means that the connection is successful.
LEDI and LED2 stay on
At this time, the gamepad is in Xinput mode by default.
2. Under Xinput mode, press and hold the HOME Button for 5 seconds to switch
C)
to Dinput emulation mode. At this time, LEDI and LED3 will glow solid
3. Under Dinput emulation mode, press the HOME Button once to switch to
Dinput digit mode, and LEDI and LED4 will stay on
4. Under Dinput digit mode, press the HOME Button for 5 seconds to switch
to Android mode, and LED3 and LED4 will stay on. Press it for 5 seconds
again to return to Xinput mode, and LEDI and LED2 stay on.
Note: one computer can pair with more than one game controllers.
Connect to Android Smartphone/ Tablet
1. Plug the Micro-B/Type C OTG adapter or OTG cable (Not Included) into the
USB receiver.
2. Plug the OTG adapter or cable into your phone or tablet.
3. Press HOME Button, and when LED3 and LED4 will keep on, indicating the
connection is successful.
4. If the game controller is not in Android mode, please refer to step2-step5 in
the"Connect to PC" chapter and make the controller in the right mode.
Note:
1. Your Android phone or tablet must fully support OTG function that needs to
be on first.
2. Android games does not support vibration for now.
To Next Page
Loading...
