Notice
1. If the pairing fails, all LEDs will keep flashing fast. Press the Home Button to force it to pair.
2. Keep the gamepad away from water and do not use it in high-temperature conditions.
3. Children should not use this product without parents' supervision.
Button Test
After the computer is paired with your computer, go to "Device and Printer", locate game controller.
Right click to go to "Game Controller Settings", then click "Property" as shown below:
Game Controllers
x
Controller
Settings Test
Test the game controller. Ifthe controller is not functioning propeHy, it may
need to be calibrated. To calibrate it, go to the Settings page.
x
Thesa settings help you configure the game controlla-s installed on
your computer.
Installed game controllaz
Controller
Controller (GAME FOR WINOOWS)
Advanced...
FAQ
Status
Propelties
Axes
X Axis / Y Axis
Buttons
z Axis
X Rotation
Y Rotation
Point of View Hat
oooooooo
Cancel
1. The USB receiver failed to be recognized by my computer?
a. Make sure the USB port on your PC works fine.
b. Insufficient power might cause unstable voltage to your PC USB port. So try another free USB port.
c. A computer running Windows XP or a lower operating system needs to install game controller
driver first.
2. Why can't I use this game controller in the game?
a. The game you are playing doesn't support game controller.
b. You need to set the gamepad in the game settings first.
06
To Next Page
Loading...
