Need help?Do you have a question about the Eaton 10000H(XL) and is the answer not in the manual?
Safety guidelines for UPS installation, including environment and placement.
Procedures for safe UPS operation, including disconnection and avoiding foreign objects.
Information on hazardous voltages, servicing by qualified personnel, and battery handling.
Instructions for safely transporting the UPS in its original packaging.
Guidelines for storing the UPS in a ventilated and dry environment.
Lists safety and EMC standards the units comply with.
Explains the ON/OFF switches and their operational functions on the UPS.
Describes the meaning and function of various LEDs on the UPS display panel.
Details input/output connections, wiring, and terminal block diagrams for specific UPS models.
Guides on connecting computers to the UPS outlet sockets.
Instructions on charging the UPS batteries for optimal performance.
Steps for powering on the UPS with and without utility power.
How to test the UPS system's functionality.
Procedures for shutting down the UPS in different operating modes.
How to mute or re-enable audible alarms on the UPS.
Details connecting external batteries for long backup time models.
Lists common UPS problems, their causes, and recommended solutions.
Notes on user-serviceable parts and battery replacement guidelines.
Guidance on charging batteries during storage to maintain their health.
Details input, output, and battery electrical specifications for UPS models.
Specifies operating temperature, humidity, and altitude limits for the UPS.
Provides backup time estimates at different load levels for UPS models.
Lists the physical dimensions and weights of various UPS models.
Details general specifications and electrical performance of higher capacity UPS models.
Steps for unpacking and inspecting the UPS and its contents for damage.
Guidance on wiring, grounding, and connecting power cords for safe installation.
Wiring diagram for terminal blocks of 6000H/10000H UPS models.
Step-by-step guide for connecting external batteries to long backup time (XL) UPS models.
Instructions for connecting multiple UPS units in parallel for power sharing and redundancy.
Steps for turning on the UPS in Line/AC mode and Battery mode.
Procedures for shutting down the UPS in different operational states.
Guidance on adding or removing UPS units in a parallel system.
Important warnings for operating UPS units in a combined parallel system.
Graphs showing backup time based on load level for standard UPS models.
Lists common UPS problems, their causes, and recommended solutions.
Describes the UPS operation when connected to utility power.
Explains UPS operation when running solely on battery power.
Details the UPS operation when in bypass mode.
Describes the UPS behavior and indications when operating in an abnormal mode.
Pin assignment and description for the RS232 communication port.
Pin assignment for the optional AS400 communication interface.
Explains the function of each indicator on the display panel for specific models.
To Next Page
General
