To Next PageTo Next Page
Need help?Do you have a question about the Eaton 9PX 1000i RT2U and is the answer not in the manual?
General| Power Rating | 1000 VA / 900 W |
|---|---|
| Topology | Double Conversion Online |
| Output Power Factor | 0.9 |
| Frequency | 50/60 Hz |
| Transfer Time | 0 ms |
| Form Factor | Rack/Tower |
| Output Voltage | 230V |
| Battery Type | Sealed Lead Acid |
| Efficiency | Up to 95% |
| Communication Ports | USB, RS232 |
| Input Voltage | 230V |
Overview of the UPS's graphical LCD control panel and its indicator status descriptions.
Explanation of the UPS LCD screen saver and the status information displayed on the panel.
Step-by-step guide for connecting the internal batteries of the UPS unit.
Instructions for connecting Extended Battery Modules (EBMs) to the UPS.
Procedure for connecting the UPS to the AC power source and loads without a HotSwap MBP module.
Steps for connecting the UPS and equipment using the HotSwap MBP module.
Details on connecting RS232 or USB communication ports and installing communication cards.
Explanation of programmable signal inputs like RPO and ROO for remote UPS control.
Steps for starting the UPS and verifying normal operation status.
Procedure for initiating UPS operation directly from battery power (cold start).
Instructions for safely shutting down the UPS unit through the front panel.
Detailed procedure for safely replacing the internal batteries of the UPS unit.
Procedure for replacing Extended Battery Modules (EBMs) and handling precautions.
Chart to identify and resolve common UPS alarms, faults, and conditions.
