Why is firmware download not possible on my Eaton 9PX 5000i RT3U Netpack?
Firmware download may be impossible because one of the two UPS units is in Online or Battery mode. To resolve this, select Standby or Bypass mode.
What to do if my Eaton UPS displays 'Load unbalance'?
If your Eaton UPS displays 'Load unbalance', it could be because one of the "UPS output" switches is off on the back of the ModularEasy. Switch on the "UPS output" switch on the ModularEasy to fix this.
General| Power Rating | 5000 VA / 4500 W |
|---|---|
| Rack Height | 3U |
| Output Frequency | 50/60 Hz |
| Output Power Factor | 0.9 |
| Topology | Double conversion online |
| Input Frequency | 40-70 Hz |
| Runtime at Half Load | 11 minutes |
| Display | LCD |
| Form Factor | Rack/Tower |
| Output Voltage | 200/208/220/230/240V |
| Output Connections | IEC C13, IEC C19 |
| Network Management | Yes, via Network Card |
| Battery Type | Sealed Lead Acid |
| Efficiency | Up to 94% |
| Communication | USB, Serial, Relay |
| Batteries | Internal |
| Input Voltage Range | 176-276 VAC without derating (100-300 VAC with derating) |
Lists safety and EMC certification standards for the ModularEasy UPS.
Explains important symbols used in the manual for warnings and information.
Details safety precautions related to personnel working with the UPS system.
Outlines safety instructions for installation and product usage.
Highlights specific precautions for ModularEasy operation and service.
Details Eaton's environmental protection policy and eco-design approach for products.
Describes standard rack and tower installation methods for the ModularEasy.
Details the components and panels of the ModularEasy unit.
Explains how to check and upgrade the UPS firmware for parallel compatibility.
Illustrates the display screen for managing parallel UPS systems.
Guides on configuring the redundancy mode for parallel UPS operations.
Procedures for checking equipment for damage and unpacking the unit.
Lists and verifies the included accessory items for the ModularEasy.
Describes tower and rack installation procedures, including examples.
Details electrical requirements, protective devices, and cable cross-sections.
Step-by-step guide for connecting power cables to the 9PXMEZ6Ki unit.
Instructions for connecting power cables for 9PXMEZ11Ki with a common AC source.
Guide for connecting power cables for 9PXMEZ11Ki with separate AC sources.
Procedure for starting up a parallel UPS system with ModularEasy.
Steps for performing maintenance on UPS units connected via ModularEasy.
Detailed instructions for replacing a faulty UPS unit with ModularEasy.
Lists common issues, causes, and solutions for the ModularEasy system.
Technical specifications for the 9PXMEZ6Ki model.
Technical specifications for the 9PXMEZ11Ki model.
To Next Page
