Eaton 9PX 5000i RT3U Netpack User Manual

Page 6
614-09354-01_EN
2. Presentation
The Eaton® ModularEasy is an essential part of your Parallel system. It allows the connection of 2 UPS
together, moreover, it possible to service or even replace the UPS without affecting the connected loads.
You can safely eliminate the effects of UPS maintenance and guard the integrity of your equipment.
Providingoutstandingreliability,theEatonModularEasyuniquebenetsinclude:
• easy and fast connection to UPS due to Input/Output and signal "all in one" patented connector
(ModularEasy 5/6kVA range)
• "make before break" feature to allow full servicing (electrical power continuity) when switching from
UPS position to Bypass (and vice versa)
• communication feature with UPS: detection of ModularEasy connection and switch position
(Normal or Bypass)
• load connection by both terminal blocks and IEC outlets (16A C19).
2.1 Standard installation
Rack installation Tower installation
Description Weight
(lb/kg)
Overall Dimensions (inch/mm)
D x W x H
Rack Dimensions (inch/mm)
d x W x H
9PXMEZ6Ki 22.8 / 10.3 27 x 17 x 5 / 690 x 440 x 130 21.3 x 17 x 5 / 540 x 440 x 130
9PXMEZ11Ki 32.6 / 15 27 x 17 x 5 / 690 x 440 x 130 21.3 x 17 x 5 / 540 x 440 / 130

Eaton 9PX 5000i RT3U Netpack Specifications

General

Power Rating	5000 VA / 4500 W
Rack Height	3U
Output Frequency	50/60 Hz
Output Power Factor	0.9
Topology	Double conversion online
Input Frequency	40-70 Hz
Runtime at Half Load	11 minutes
Display	LCD
Form Factor	Rack/Tower
Output Voltage	200/208/220/230/240V
Output Connections	IEC C13, IEC C19
Network Management	Yes, via Network Card
Battery Type	Sealed Lead Acid
Efficiency	Up to 94%
Communication	USB, Serial, Relay
Batteries	Internal
Input Voltage Range	176-276 VAC without derating (100-300 VAC with derating)