Eaton 5S 1500 User Manual

4
614-06818-01
Battery change
• Warning: take care not to inverse the polarity + (red) and - (black) when connecting the battery as this will destroy
the device.
b
c
a
Press and slide
a
b
c
Press and slide
700
1000 / 1500
Battery disposal and safety
•Caution. Batteryservicelifeisreducedby50%foreverytendegreesabove25°C(77°F).
•The battery must be replaced exclusively by qualied personnel (risk of shock),withnewbatteryapprovedby
EatontoensurecorrectoperationoftheUPS.
•Thebatterymustbedisposedofinaccordancewithapplicableregulations.Toremovethebattery,shutdownthe
UPS(button
6
OFF),removethepowercordandproceedasindicatedbelow"Batterychange".

Eaton 5S 1500 Specifications

General

Output Voltage	230V
Topology	Line-Interactive
Form Factor	Tower
Nominal Input Voltage	230V
Input Connection	IEC C14
Efficiency at Full Load	95%
Frequency Range	50/60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-15°C to 45°C
Battery Type	Sealed lead-acid
Interface Ports	USB
Output Connections	8 IEC C13
Typical Backup Time at Full Load	5 minutes
Surge Energy Rating	320 Joules
Typical Recharge Time	4 hours
Humidity	0-95% non-condensing
Safety Approvals	CE