Eaton 70160 - User Manual

Other manuals for Eaton 70160

Repair Information20 pages

Questions and Answers

B
Bryan GreenAug 12, 2025
What to do if Eaton Water Pump system is operating hot?
- A
  Ashley LarsonAug 12, 2025
  If your Eaton Water Pump system is operating hot, there are several potential causes. It could be due to a defective component, low oil level in the heat exchanger reservoir (in which case, fill to the proper level), a defective charge bypass valve, a defective inlet screen or filter, a defective pump and motor, or high system pressure (in which case, reduce system load). For defective components, consider repair or replacement.
V
Vernon ShahAug 16, 2025
What to do if Eaton 70160 system will not operate in either direction?
- E
  Eric SingletonAug 16, 2025
  If your Eaton Water Pump system won't operate in either direction, it could be due to a defective external control, low oil level in the reservoir (fill to the proper level), a defective bypass valve, a clogged inlet screen or filter, a defective pump & servo control, or high system pressure (reduce system load). For defective components, consider repair or replacement.
A
adamfuentesAug 20, 2025
Why is my Eaton 70160 Water Pump system response sluggish?
- N
  Natalie DillonAug 20, 2025
  A sluggish response in your Eaton Water Pump system may be due to a defective pump, defective charge servo control, defective bypass valve, defective pump & motor, or a clogged charge inlet screen or filter. For defective components or clogs, consider repair or replacement.
M
Melissa SalinasAug 23, 2025
What to do if Eaton Water Pump operates in one direction only?
- K
  Kristina JohnsonAug 23, 2025
  If your Eaton Water Pump operates in only one direction, the issue might stem from a defective external control, a defective servo control, or a defective system relief linkage. Consider repair or replacement of these components.
M
martinezjessicaAug 27, 2025
Why is my Eaton Water Pump system operating hot?
- A
  Ann SalinasAug 27, 2025
  If your Eaton Water Pump system is operating hot, there might be several reasons: * It could be defective. * The oil level in the heat exchanger might be low; in this case, fill it to the proper level. * The charge relief valve or the pump itself could be defective. * High system pressure could also be the cause; if so, reduce the system load. In all cases repair or replace the defective part.
Q
qdavisAug 30, 2025
What to do if my Eaton Water Pump system will not operate in either direction?
- M
  Melissa HintonAug 31, 2025
  If your Eaton Water Pump system will not operate in either direction, consider the following potential causes: * A defective external control linkage or pump. * Low oil level in the reservoir; if this is the case, fill it to the proper level. * A defective servo control. * High system pressure could also be the cause; if so, reduce the system load. In all cases repair or replace the defective part.
N
nweaverSep 3, 2025
Why is the system response of my Eaton Water Pump sluggish?
- J
  Jordan PhillipsSep 3, 2025
  If the system response of your Eaton Water Pump feels sluggish, it could be due to a defective pump or charge pump. In both cases repair or replace the defective part.
C
campbelltylerSep 7, 2025
What to do if my Eaton Water Pump operates in one direction only?
- L
  lisawardSep 7, 2025
  If your Eaton Water Pump operates in one direction only, the cause could be a defective external control linkage, a defective servo control valve, or defective system relief valves. In all cases repair or replace the defective part.