Eaton 70523 - Identification and Tools Required

3
Model 70523
Identification Numbers - Pressure or Pressure-Flow Compensated Piston Pump
Stamped on each units mounting flange.
A - Product Number Description
70523 = Single Piston Pump
70553 = Single Piston Pump, w/ Aux. Flange
B - Rotation
L - Left Hand (CCW)
R - Right Hand (CW)
C - Sequential Numbering
Single Pump - Product Number:
7 0 5 2 3 - R A A
A
Serial Number Code:
B 93 01 31 JB
Testers Initials
Day of Month (two digits)
Month (two digits)
Revision level of parts list.
Last two digits of year built.
( 93 for 1993 etc.)
B C
Year Manufactured
(1 for 1991 etc.)
Change Code
Serial Number Code prior to Jan., 1992:
1 B- 52-JB
Testers Initials
Week of Year
Identification and Tools Required
•
3/8 Inch Socket
•
9/16 Inch End Wrench
•
1-1/2 Inch End Wrench
•
11/16 Inch End Wrench
•
Rachet Wrench
•
Torque Wrench (100 lb./ft.)
•
3/16 Inch Hex Key (Allen)
•
3/16 Inch Hex Key (Allen Socket)
•
Soft Face Hammer
•
Internal Retaining Pliers (Straight .070 Tip)
•
External Retaining Pliers (Straight .070 Tip)
•
Regular or Locking Pliers
•
Seal Driver or Similar Tool
•
Petroleum Jelly (Such as Vaseline)
•
1/2 inch I.D. x 1-3/8 inch O.D. flat washer (2 ea.)
•
5/8 inch I.D. x 1-3/4 inch O.D. flat washer (1 ea.)
•
1/2 inch x 4-1/2 inch N.C. Cap screw (1 ea.)
•
1/2 inch N.C. Nut
Tools Required