Eaton 9PHD - Technical Data; Directives and Standards; Battery Specification

5 Technical data
For a complete technical specification, contact your Eaton representative. Due
to continuous product improvement programs, specifications are subject to
change without notice.
5.1 Directives and standards
Safety
IEC 62040-1: Uninterruptible power sys-
tems (UPS) - Part 1: General and safety re-
quirements for UPS
IEC 60950-1: Information technology
equipment - Safety - Part 1: General re-
quirements (as referred through the IEC
62040-1)
Performance & tests
IEC 62040-3: Uninterruptible power sys-
tems (UPS) - Part 3: Method of specifying
the performance and test requirements
Environmental
IEC62040-4: Uninterruptible Power Sys-
tems (UPS) - Part 4: Environmental As-
pects - Requirements and Reporting
IEC 62430: Environmentally conscious de-
sign for electrical and electronic products
RoHS 2011/65/EU on the restriction of the use of
certain hazardous substances in electrical
and electronic equipment
WEEE 2012/19/EU on waste electrical and elec-
tronic equipment (WEEE)
ECO Design Directive 2009/125/EC establishing a framework for
the setting of eco-design requirements for
energy-related products
Batteries 2006/66/EC on batteries and accumulators
and waste batteries and accumulators
Packaging 94/62/EC on packaging and packaging
waste
5.2 Battery specification
Battery type VRLA, 12 VDC
Battery quantity 36 blocks, 216 cells per battery string, or
40 blocks, 240 cells per battery string.
Note: Do not connect battery strings with
different battery quantity and voltage in
parallel!
Eaton 9PHD Accessory Cabinets TFC-A, EBC-F
and EBC-G User's and installation guide
©
Eaton Corporation plc 2022. All rights reserved. Document ID: P-164000538 58 (63)