3)
Strain reliefs, metal, manufacturer types as an example:
M50
- Wiska 21-35 mm 10065006, EMSKV 50
- Jacob 21-35 mm 50.650 M/R
- Hummel 22-29 mm 1.618.5000.51
- Hummel 27-35 mm 1.618.5000.50
- Hummel 25-31 mm 1.609.5000.51
- Hummel 32-38 mm 1.609.5000.50
- Jacob 24-35 mm 50.650 M
- Pflitsch 31-42 mm bg 250 ms
M40
- Wiska 16-28 mm 10065005, EMSKV 40
- Jacob 16-27 mm 50.640 M/R
M32
- Wiska 13-21 mm 10065004, EMSKV 32
- Jacob 12-21 mm 50.632 M/R
For more information on how to connect external battery cabinets to a UPS,
refer to the User’s and Installation Guide of the UPS in question.
3.2 Site preparations
The accessory cabinet installation site must meet the following guidelines.
• Install the system indoors on a level floor suitable for computer or electronic
equipment.
• Install the system in a temperature and humidity controlled indoor area.
• Install the system in an area that is free of conductive contaminants and has
sufficient air exchange.
Eaton 9PHD Accessory Cabinets TFC-A, EBC-F
and EBC-G User's and installation guide
©
Eaton Corporation plc 2022. All rights reserved. Document ID: P-164000538 17 (63)
To Next Page
Loading...
