Eaton 9SX 15K Series - Page 34

34
4
1
5
1
6
1
7
1
8
1
Label for
Mode-setting
NA
8
Notes:
1. This MBP supports the following 4 modes of connection by default, with Copper busbars
#1, #3, #4, and #5, as well as 4 pieces of ‘Mode-setting label’ are included as
accessories.
3-3(single source)/ 3-3(dual source)
3-1(single source)/ 3-1(dual source)
2. To configure to the following 4 modes of connection, contact your supplier for the issue of
Copper Busbars #6, #7, and #8, as well as the corresponding ‘Mode-setting label’.
1-1(single source)/ 1-1(dual source)
1-3(single source)/ 1-3(dual source)
Please refer to Chaper 3.1 (Wiring of single MBP (Standard MBP)) for the detailed wiring
procedures of all 8 modes of connections. The default configuration of this MBP is 3-1 phase
(single source).