33
3.2 Wiring of single MBP (Basic version)
Single MBP (Basic version) terminal block (TB) layout as below:
Notes:
1. AC input TB: N/N/mL1/ bL1/ mL2/bL2/ mL3/bL3/PE (‘m’ is main input,’b’ is bypass input)
2. AC segment 1 (Not programmable): PE/N/N/L1/L2/ L3
3. UPS input TB: PE/N/N/L1/L2/L3
4. UPS bypass TB: L1/L2/L3
5. UPS output TB: N/N/L1/L2/L3
As like the MBP (standard version), the MBP (Basic version) also provides 8 possible modes of
wiring applications. Please select a mode and connect the system with the appropriate jumpers
below.
To gain access to the terminal blocks, it is only necessary to remove the terminal block’s top
cover, without removing the whole box.
To Next Page
Loading...
