Eaton 9SX 15K Series - Page 37

37
3.3.1 Mode 3-1(single source) (Default MBP wiring mode)
1. Input:
I. Connect the main-ground cable (PE) to the chassis
II. Bridge the ‘AC input terminal N/N/N’ with ‘busbar #9’, then connect the AC
source cable (N) to it
III. Bridge the ‘AC input terminals mL1/bL1/bL2/bL3’ with ‘busbar #15’, then connect
the AC cable (L1) to it
IV. Connect the ‘AC input terminal mL2/mL3’ to AC cable (L2/L3)
2. Output:
I. Connect the ground cable (PE) to the chassis