What to do if Eaton UPS reports an output short?
If your Eaton UPS indicates an output short, turn off the UPS, remove all connected loads, and verify that the load is not faulty or short-circuited. After doing this, press the button to clear the fault alarm and restart the UPS. If the problem persists, it is recommended to contact your supplier.
What causes parallel line loss in Eaton UPS?
Parallel line loss in an Eaton UPS is caused by an abnormal parallel connection. Check if the connection is normal.
Why did my Eaton 9SX 15KPM Serie perform an emergency shutdown?
An emergency shutdown of your Eaton UPS is caused by a shutdown in emergency. Check the EPO terminal status.
What to do if Eaton UPS says positive battery is not connected?
If your Eaton UPS indicates that the positive battery is not connected, check the battery and battery cable. If the battery is damaged, replace it immediately by a professional.
How to resolve input line reversed error on Eaton UPS?
If your Eaton UPS displays an 'Input line reversed' error, confirm the input connection and the ground connection. The cause of this problem can be reversed input L N line or no ground.
What causes Eaton 9SX 15KPM Serie UPS positive battery overcharge?
A positive battery overcharge in your Eaton UPS is caused by high battery voltage. Check the battery and charger. If the battery is damaged, replace it immediately by a professional.
How to fix Eaton 9SX 15KPM Serie UPS positive battery low voltage?
If your Eaton UPS indicates a positive battery low voltage, check the battery. If the battery is damaged, replace it immediately by a professional.
What to do if Eaton UPS shows ambient temperature high?
If your Eaton UPS alarms due to high ambient temperature, first check if the surrounding temperature exceeds 50°C. If the ambient temperature is normal and the UPS continues to alarm, it is recommended to contact your supplier.
Why is my Eaton 9SX 15KPM Serie showing an inverter overload fault?
An inverter overload fault on your Eaton UPS typically means the load exceeds the rated value. To resolve this, redistribute the load, remove any non-critical devices, and check the remaining load for faults.
General| Topology | Double Conversion Online |
|---|---|
| Crest Factor | 3:1 |
| Output Frequency | 50/60 Hz +/- 0.1% |
| Battery Type | Sealed, lead-acid |
| Communication | USB |
| Operating Temperature | 0 to 40°C |
| Humidity | 0-95% non-condensing |
Important safety instructions including fire extinguisher use and environmental conditions.
Explanation of symbols used to alert users of important information.
Guidelines for qualified personnel, voltage backfeed, and toxic materials.
Electrical and environmental safety for AC connections, circuit breakers, and usage.
Precautions for heavy units, straps, and battery module replacement.
Products developed with eco-design, substance compliance, and recyclable packaging.
How the UPS protects equipment from common power problems and disturbances.
Front view of the UPS power module, identifying key components like buttons and indicators.
Front view of the External Battery Module (EBM) for identification.
Front view of the Maintenance Bypass Module (MBP), showing its label.
Procedures for checking the module for damages during transportation and reporting.
Steps for installing the UPS module in a rack cabinet and tower configuration.
Guidelines for installing EBM modules in rack or tower configurations.
Refers to the MBP user manual for installation steps of the Maintenance Bypass Module.
Wiring steps for AC input/output to UPS in different modes, including system diagrams.
Instructions for connecting External Battery Modules (EBMs) to the UPS, including wiring schematics.
Information on connecting a single Maintenance Bypass Module (MBP) for isolation.
Installation steps for paralleled UPS systems in rack or tower configurations.
Cable selection tables for paralleled systems installed by 15KVA and 20KVA UPS.
Details on USB, RS232, EPO, Dry Contacts, Modbus/BMS, and card slots.
Description of the UPS control panel, including LED indicators and power button functions.
Overview of the 4.3-inch color touch screen, user interface, and menu structure.
How to query parameters, history, control operations, and configure UPS settings.
Procedures for starting, shutting down, and managing UPS functions and modes.
Guidelines for maintaining batteries, including temperature, charging, and replacement advice.
A table listing common faults, possible causes, and recommended solutions.
Summary of electrical, environmental, and certification specifications for the UPS models.
To Next Page
