Any fault or alarm messages are displayed here. The
display will scroll through multiple messages if there
are more than one.
This section will be left blank when no active alarms
are present.
Three input status are displayed: Bypass, Mains, and
Battery.
The current input state will be highlighted.
Different system status are distinguished by the
colour: Blue = Normal; Orange = Alarm; Red = Fault.
The Text indicates system operating mode.
Tap this section to bring up detailed system
information.
Tap this icon to enter the main menu page.
Indicates the UPS number in a paralleled system.
For a single UPS system, this display is always ‘UPS1’
Displays battery information.
Displays output information.
Displays the system time. To adjust it, go to: Setting
→ General → System Time.
7.2.4 Menu
Under the main page, click on the menu icon in the lower left corner to enter
the Menu page.
Click on each icon to enter the corresponding sub-menu page.
Screen saver
• Under any page, the screensaver is activated within 5 minutes of
inactivity. When screensaver is active, touch the screen to return to the
To Next Page
Loading...
