Eaton 9SX 5000 - Checking the Accessory Kit

Page 16
5-6kVA EU_EN
3. Installation
3.3 Checking the accessory kit
Verify that the following additional items are included with the UPS: z
1
6
2
11
10
9
7
4 5
3
8
1
(2) Tower stands
2
Rack kit for 19-inch enclosures (optional)
3
(2) cable glands for Input/Output connection
4
(2) cable lockers for 16A outlets
5
(2) cable lockers for 10A outlets
6
Network-MS communication card
(optional)
7
RS232 communication cable
8
USB communication cable
9
User manual
10
Safety instructions
11
Software CD-ROM
If you ordered an optional Extended Battery Module (EBM), verify that the following additional items are included z
with the EBM:
3
4
2
1
1
Battery power cable, attached with battery
detection cable
2
Stabilizer bracket (4 screws included)
3
Rack kit for 19-inch enclosures (optional)
4
EBM Installation manual.
Discard the EBM user’s guide if you are installing the EBM with a new UPS at the same time.
Use the UPS user’s guide to install both the UPS and the EBM.
If you ordered other UPS accessories, refer to specific user manuals to check the packing
contents.