Eaton Cooper Power System LCR 6600 RFN - LCR 6600 RFN LED Indicators; LCR Unit LEDs; RF SelectCom Module LEDs

Eaton’s Cooper Power Systems 11
CT-Y0-0557
!
SAFETY
FOR LIFE
LCR 6600 RFN LEDs
LCR LEDs
The LCR LEDs have the following meanings:
Load Status (Red)
• LED Off – LED is off when the load is not being
controlled.
• LED On – LED is on when the relay is activated
and the load is being controlled.
Power (Green)
• LED On – LED is on during normal operation to
indicate that the unit is receiving power.
• LED Off – LED is off when that the unit is not
receiving power.
RF SelectCom LEDs
The two RF SelectCom Module LEDs have the
following meanings:
Status (Blue)
• LED On During Startup – LED is on solid for 30
seconds during startup, then it turns off.
• LED On – LED is on solid when an RF radio
message is being transmitted or received in a
connection.
NOTE: The blue LED is not illuminated when a
broadcast message is being received
.
Status (Green)
• LED Off – LED is off when the RF SelectCom
module has lost power or when the RF SelectCom
firmware has malfunctioned.
• LED On – LED is on solid when the RF SelectCom
firmware has malfunctioned.
• LED Blinking – LED blinks (1/2 second on and 1/2
second off) when the RF SelectCom module has
power and it is functioning normally.