Need help?Do you have a question about the Eaton Crouse-Hinds MTL5500 Series and is the answer not in the manual?
General| Mounting | DIN Rail |
|---|---|
| Protection Rating | IP20 |
| Operating Temperature Range | -20°C to +60°C |
| Hazardous Area Certification | ATEX, IECEx |
| Weight | 150 g |
Reference to certification documentation for product electrical ratings.
Information on product documentation for intrinsic safety certification available on website.
Checking module suitability for functional safety applications and referring to Safety Manual.
Note that MTL5500 products MUST NOT be repaired; faulty units must be replaced.
Requirements for competent personnel installation, operation, and maintenance of ATEX equipment.
Compliance with regulations for installation, including segregation and enclosure requirements.
Specific conditions for using equipment in Zone 2 hazardous areas, including enclosure and wiring.
Details on preparing modules before installation, including switch settings.
Guidance on mounting multiple isolators in rows or columns for wiring access.
Information on installing and using the MTL5500 power bus kit for power distribution.
Details on the MPA5500 adaptor for powering modules from AC mains.
Specifying and assembling earth rail and tagging strip accessories.
Environmental factors to consider when installing DX enclosures, including temperature and humidity.
Graph and equation for calculating maximum outside enclosure temperature based on power dissipation.
Covers MTL5501-SR, MTL5510, MTL5510B, MTL5511, MTL5513, MTL5514, MTL5514-T, MTL5514D, MTL5516C, MTL5517.
Covers MTL5521, MTL5521-T, MTL5522, MTL5523, MTL5523V, MTL5523VL, MTL5524, MTL5525, MTL5526.
Covers MTL5531, MTL5532, MTL5533, MTL5553.
Covers MTL5541, MTL5541A, MTL5541AS, MTL5541S, MTL5541S-T, MTL5544, MTL5544A, MTL5544AS, MTL5544D, MTL5544S.
Covers MTL5546, MTL5546Y, MTL5546Y-T, MTL5549, MTL5549Y.
Covers MTL5561.
Covers MTL5573, MTL5575, MTL5576-RTD, MTL5576-THC, MTL5581, MTL5582, MTL5582B.
Covers MTL5599, MTL5991.
Details on using PCS45 software and PCL45USB link for configuring temperature converters.
Enclosure protection degree requirements (IP54) for products mounted in external enclosures.
Information on MTL5000 series units, often superceded by MTL5500 equivalents.
Details on the MTL5018AC module, including wiring, line fault detection, and phase reversal.
Provides bi-directional serial data communication for instrumentation in hazardous areas.
Connects to transmitters, supplies configurable alarm signals via changeover relays.
To Next Page
