For more information visit: www.eatonelectrical.com IB01602009E
Instruction Booklet
Page 22 Effective: April 2004
ATC-300 Automatic
Transfer Switch
Controller
Table 2 Programmable Features and Setpoints (Cont.)
See tables in the appendix for Voltage and Frequency Pickup and Dropout settings.
Setpoint Optional
Feature
Setpoint Units Description Range Factory Default
DST ADJUST Day Light Savings 0 or 1 (1=Enabled) 1
LANGUAGE Selected Language English, French, Spanish, or
Dutch
English
CHANGE
TIME/DATE?
Set Time and Date
Hours Set Hour 0 to 23 Eastern Standard Time
MINUTES Set Minute 0 to 59 Eastern Standard Time
WEEKDAY Set Weekday SUN, MON, TUE, WED,
THU, FRI or SAT
Eastern Standard Time
MONTH Set Month JAN or 01 Eastern Standard Time
DAY Set Day 1 to 31 Eastern Standard Time
YEAR Set Year Current Year Eastern Standard Time
RESET
SYSTEM
COUNTERS?
Yes or No No
RESET ALL? Resets all System Counters Yes or No No
RESET
ENGINE RUN?
Hours Resets ENGINE RUN Counter 0 to 9999 XXXX
RESET
S1 CONN
Hours Resets S1 CONN Counter 0 to 9999 XXXX
RESET
S2 CONN
Hours Resets S2 CONN Counter 0 to 9999 XXXX
RESET
S1 AVAIL
Hours Resets S1 AVAIL Counter 0 to 9999 XXXX
RESET
S2 AVAIL
Hours Resets S2 AVAIL Counter 0 to 9999 XXXX
RESET
LOAD ENERG
Hours Resets LOAD ENERG Counter 0 to 9999 XXXX
RESET
TRANSFERS
Hours Resets TRANSFERS Counter 0 to 9999 XXXX
SAVE
SETPOINTS?
Save Changed Setpoints Yes or No Yes
To Next Page
Loading...
