Eaton Cutler-Hammer MP-3000 - Page 36

Page 36 I.L. 17562
PR 0.3 Effective 8/99
Line
No.
Display Help Message Setpoint
Range/ Value
Selection
Value as
shipped
Selected Value
Reset button to
perform selected
test
6 Choose:
AOUT 4
AOUT 12
or
AOUT 20
FORCE ANALOG OUTPUT
4 – FORCE A 4 MA OUTPUT
12 – FORCE A 12 MA
OUTPUT
20 – FORCE A 20 MA
OUTPUT
Toggle between
AOUT 4,
AOUT 12, AND
AOUT 20
Press and hold
Reset button to
output forced
value
----- -----
7 DI 1OFF
OR DI 1
ON
STATE OF DISCRETE INPUT
1
Read only ----- -----
8 DI 2 OFF
OR DI 2
ON
STATE OF DISCRETE INPUT
2
Read only ----- -----
Page 14 SP RESET SETPOINTS FOR RESETTING HISTORY MODE PAGES
1 MTR RST
or
PUSH RST
MTR RST – PUSH RAISE TO
ENABLE MOTOR HISTORY
RESET
PUSH RST – PUSH RESET
TO EXECUTE RESET OF
MOTOR HISTORY OR PUSH
RAISE TO NOT RESET
Change to PUSH
RST and press
Reset button, or
return to MTR
RST
----- -----
2 TRIP RST
or
PUSH RST
TRIP RST – PUSH RAISE TO
ENABLE TRIP HISTORY
RESET
PUSH RST – PUSH RESET
TO EXECUTE RESET OF
TRIP HISTORY OR PUSH
RAISE TO NOT RESET
Change to PUSH
RST and press
Reset button, or
return to TRIP
RST
----- -----
3 ALRM RST
or
PUSH RST
ALRM RST – PUSH RAISE TO
ENABLE ALARM HISTORY
RESET
PUSH RST – PUSH RESET
TO EXECUTE RESET OF
ALARM HISTORY OR PUSH
RAISE TO NOT RESET
Change to PUSH
RST and press
Reset button, or
return to ALRM
RST
----- -----
4 TOT RST
Or
PUSH RST
TOT RST - PUSH RAISE TO
ENABLE TOTAL HISTORY
RESET
PUSH RST - PUSH RESET TO
EXECUTE RESET OF ALARM
HISTORY OR PUSH RAISE
TO NOT RESET
Change to PUSH
RST and press
Reset button, or
return to TOT
RST
----- -----