Eaton ELC-PB - Page 101

ELC Programming Manual
FOR MORE INFORMATION VISIT: WWW.EATON.COM MN05003003E
2-72
Special D
Function
ELC
-PB
ELCB
-PB
ELC
-PC
-PA
-PH
ELCM
-PH
- PA
ELC
-PV
OFF
Ø
ON
STOP
Ø
RUN
RUN
Ø
STOP
Type Latched
Factory
setting
D1468
Number of pulses required per
revolution of motor at CH1 (low word)
- - - Y - - - R YES 2,000
D1469
Number of pulses required per
revolution of motor at CH1 (high word)
- - - Y - - - R YES 0
D1470
Distance created for 1 revolution of
motor at CH0 (low word)
- - - Y - - - R YES 1,000
D1471
Distance created for 1 revolution of
motor at CH0 (high word)
- - - Y - - - R YES 0
D1472
Distance created for 1 revolution of
motor at CH1 (low word)
- - - Y - - - R YES 1,000
D1473
Distance created for 1 revolution of
motor at CH1 (high word)
- - - Y - - - R YES 0
D1474
Machine unit of CH0 movement (low
word)
- - - Y - - - R YES 0
D1475
Machine unit of CH0 movement (high
word)
- - - Y - - - R YES 0
D1476
Machine unit of CH1 movement (low
word)
- - - Y - - - R YES 0
D1477
Machine unit of CH1 movement (high
word)
- - - Y - - - R YES 0
D1478
Input / output percentage value of
CH2(Y4, Y5) close loop control
- - - Y 100 - -
R/W NO
100
D1479
Input / output percentage value of CH3
CH3(Y6, Y7) close loop control
- - - Y 100 - -
R/W NO
100
D1480
↓
D1495
Data buffer to store the data read from
Slave ID#1, when M1353 = OFF.
When M1353 = ON, the starting D
register No. to store data read from
ID#1~16 by Master (available in PV).
- Y Y Y 0 - - R NO 0
D1496
↓
D1511
Data buffer to store the data to be
written on Slave ID#1, when M1353 =
OFF.
When M1353 = ON, the starting D
register No. to store data written on
ID#1~16 by Master (available in PV).
- Y Y Y 0 - - R/W NO 0
D1512
↓
D1527
Data buffer to store the data read from
Slave ID#2, when M1353 = OFF.
When M1353 = ON, the starting D
register No. to store data read from
ID#17~32 by Master (available in PV).
- Y Y Y 0 - - R NO 0
D1528
↓
D1543
Data buffer to store the data to be
written on Slave ID#2, when M1353 =
OFF.
When M1353 = ON, the starting D
register No. to store data read from
ID#17~32 by Master (available in PV)
- Y Y Y 0 - - R/W NO 0
D1544
↓
D1559
Data buffer to store the data read from
Slave ID#3, when M1353 = OFF.
When M1353 = ON, the starting D
register No. to store data written on
ID#17~32 by Master (available in PV).
- Y Y Y 0 - - R NO 0