Need help?Do you have a question about the Eaton EFX48 e-Fuse Series and is the answer not in the manual?
General| Reverse Polarity Protection | Yes |
|---|---|
| Thermal Shutdown | Yes |
| Enable Input | Yes |
| Protection Features | Overcurrent, Overvoltage, Reverse Polarity, Thermal Shutdown |
| Operating Temperature Range | -40°C to +85°C |
| Overcurrent Protection | Yes |
| Overvoltage Protection | Yes |
| Inrush Current Control | Yes |
| Status Output | Yes |
| Certifications | UL |
This guide covers installation, operation and maintenance of the RM3-340/440 Series.
This guide is intended for use by installers and operators/maintenance staff.
Provides email for reporting issues with the manual.
Important safety information for transporting, unpacking, installation, and operation.
Section contains important warnings to read before installation or operation.
Covers electrical safety requirements and precautions for the DC system.
Guidelines for installing the DC system in a suitable location and environment.
Importance of correct battery polarity connection to avoid damage.
Hazards associated with energy levels in rectifiers, converters, and batteries.
Safety precautions and guidelines for handling and installing batteries.
Provides an overview of the RM3-340/440 Series DC Power Systems.
Details about the rectifiers used in the RM3-340/440 Series.
Information on securing the EFX48 System Controller against cyber threats.
Important warnings related to the preparation phase of installation.
Procedures for inspecting equipment for damage and reporting issues.
A step-by-step guide for installing the RM3-340/440 DC Power System.
Verifies AC supply and grounding for safe system operation.
Procedures for mounting the unit into a rack.
Guides on connecting DC load and battery cables.
Steps to complete before powering up the system.
Instructions for installing rectifier modules into the system.
Checklist to confirm all pre-power-up steps are complete.
Details on operational settings stored in the configuration file.
Steps to initiate the EFX48 start-up sequence.
How to operate the EFX48 using its front panel interface.
Overview of communication interface options for the EFX48.
Details on setting up Ethernet connections for communication.
Instructions for accessing and controlling the EFX48 via a web browser.
Detailed descriptions of the EFX48's primary features.
How to manage and control connected loads.
Information on battery management and monitoring features.
Guidance for diagnosing and resolving minor installation and operational problems.
Procedures for replacing or adding rectifier modules.
Steps for replacing the EFX48 system controller unit.
Keeping track of system components for security management.
Measures to prevent unauthorized physical access to the system.
Configuring logical access mechanisms for secure system access.
Lists safety and EMC certifications for the product.
Specifications for the system's AC input.
Specifications for the system's DC output.
Parameters for connecting battery strings.
Pin assignments for the EFX48 System Controller connectors.
Required safety equipment for installation and maintenance.
Standard electrical toolkit and specific tools required.
To Next Page