Need help?Do you have a question about the Eaton ELCB Series and is the answer not in the manual?
General| Brand | Eaton |
|---|---|
| Model | ELCB Series |
| Category | Controller |
| Language | English |
Instructions for mounting the ELCB to a 35mm DIN rail using a retaining clip.
Details on connecting AC power supply, voltage requirements, and grounding.
Recommendations for wiring protection circuits at the power supply input terminal.
Explains DC input wiring for SINK and SOURCE modes with equivalent circuits.
Diagrams and explanations for connecting relay outputs.
Methods for transient voltage suppression on DC loads for relay outputs.
Methods for transient voltage suppression on loads for transistor outputs.
Guidance on wiring for RS-485 communication, including master/slave nodes and termination.
Defines the I/O terminal configuration for ELCB-PB10NNDR/T models.
Defines the I/O terminal configuration for ELCB-PB14NNDR/T models.
Defines the I/O terminal configuration for ELCB-PB20NNDR models.
Defines the I/O terminal configuration for ELCB-PB30NNDR models.
Defines the I/O terminal configuration for ELCB-PB40NNDR/T models.
To Next Page