Need help?Do you have a question about the Eaton S801+ Series and is the answer not in the manual?
General| Product Series | S801+ |
|---|---|
| Category | Controller |
| Input Voltage | 24 VDC |
| Output Voltage | 24 VDC |
| Number of Inputs | 8 |
| Protection Class | IP20 |
| Communication Protocol | Modbus |
Provides important cautions and warnings for personal safety and equipment protection.
Details precautions for working with high voltage components to prevent shock.
Details how to mount the S801+ using specified hardware and torque.
Guides on connecting line and motor power wiring according to codes.
Explains control wiring connections via terminal block and CIM.
Explains how the S801+ controls motor voltage and torque for smooth starting.
Lists available starting and stopping modes for the S801+ Soft Starter.
Details local control functions and input commands to the terminal block.
Describes the Control Interface Module (CIM) for configuring the S801+.
Recommends initial setup steps before applying line voltage.
To Next Page
