Need help?Do you have a question about the Eaton DS7 and is the answer not in the manual?
General| Product type | - |
|---|---|
| Certification | IEC/EN 60947-4-2, UL 508, CSA22.2-14 |
| Product color | Gray |
| Protection class | I |
| International Protection (IP) code | IP20 |
| Input voltage | 200 - 480 V |
| DC input voltage | 24 V |
| AC input frequency (fridge) | 50/60 Hz |
| Sustainability compliance | Yes |
| Sustainability certificates | CE |
| Operating temperature (T-T) | -40 - 40 °C |
Weight and Dimensions| Weight | 1800 g |
|---|
Lists standard features of DS7 series soft starters compliant with IEC/EN 60947-4-2.
Provides a detailed description of the DS7-340/342 soft starter components.
Explains the key for assigning part numbers to DS7 series soft starters for correct selection.
Lists technical specifications including assigned motor outputs for DS7 soft starters.
Specifies the intended applications and compliance of DS7 series soft starters in industrial environments.
Details recommended maintenance measures and intervals for ensuring the longevity of DS7 soft starters.
Describes criteria for selecting the correct DS7 soft starter based on supply network and motor characteristics.
Explains the phase control and voltage control functions of DS7 soft starters for smooth motor acceleration.
Provides guidance on selecting DS7 soft starters based on motor characteristics and application requirements.
Explains the basic power connection of the motor and power section for DS7 soft starters, including protection.
Discusses safety category B and the need for additional measures for emergency switching off functions.
Outlines protection methods, including Type 1 and Type 2 coordination using fuses.
Details various motor connection configurations, including star/delta and AC motor connections.
Explains overload capability, conversion for lower overcurrents, and configuration options for DS7 soft starters.
Covers critical electrical installation steps, including safety warnings and power terminal connections.
A comprehensive checklist to ensure all steps are completed before commissioning the DS7 soft starter.
Provides instructions and considerations for commissioning DS7-34… soft starters, including factory settings.
Explains the motor acceleration process based on set values and control signals, including safety warnings.
Provides information for fault detection and troubleshooting, detailing common issues like motor not starting or stopping.
Covers programming aspects of DS7-SWD soft starters, including cyclic and acyclic data transfer.
Explains diagnostic messages and LED indications for SmartWire-DT systems, including error and warning handling.
To Next Page