1 Device series DS7
1.10 Storage
24 DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com
1.10 Storage
If the DS7 soft starter is stored before use, suitable ambient conditions must
be ensured at the storage site:
• Storage temperature: -25 - +60 °C,
• Average relative humidity: < 85%; no condensation
1.11 Service and warranty
In the unlikely event that you experience a problem with your DS7 soft
starter, please contact your local sales office.
When you call, have the following data ready:
• The exact part no. (see nameplate)
• the date of purchase,
• A detailed description of the problem related to the DS7 soft starter
If some of the information printed on the rating plate is not legible, please
state only the data which are clearly legible.
Information concerning the guarantee can be found in the Terms and
Conditions Eaton Industries GmbH.
Hotline After Sales Service
+49 (0) 180 5 223822 (de, en)
AfterSalesEGBonn@eaton.com
1.12 Disposal
The soft starters of the DS7 series can be disposed of as electronic scrap in
accordance with national regulations.
To Next Page
Loading...
