8 SmartWire-DT
8.6 Interoperability
148 DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com
8.6 Interoperability
8.6.1 Gateways
The DS7-SWD soft starter’s interoperability is guaranteed with the following
SmartWire-DT gateway firmware versions (and higher):
Table 25: Firmware versions of SmartWire-DT gateways
8.6.2 Fieldbus description files
The DS7-SWD’s interoperability is guaranteed with the following versions
(and later versions) of the fieldbus description files for the corresponding
gateway:
Table 26: Compatible DS7-SWD fieldbus description files
8.6.3 SWD-Assist
The SWD-Assist program provides valuable support in the engineering of
your SmartWire-DT
topology.
SWD-Assist is
software that runs
under
operating systems Windows 2000 (SP 4), Windows XP, Windows Vista
(32-bit) or Windows 7 and relieves you of the planning work required for an
SWD topology. DS7-SWD soft starters can be used in SWD-Assist version
V 1.60 and higher.
SmartWire-DT gateway Firmware Version
EU5C-SWD-CAN V 1.20
EU5C-SWD-DP V 1.20
￫
The firmware of the SmartWire-DT gateway can be updated
using the SWD-Assist program. This program, as well as the
required firmware versions, can be downloaded for free on the
Internet at:
http://www.eaton.de/EN/EatonDE/ProdukteundLoesungen/Electrical/
Kundensupport/index.htm
￫ Customer support ￫ Download Center – Software
SmartWire-DT gateway Description file
EU5C-SWD-CAN EU5C-SWD-CAN_V120.eds
EU5C-SWD-DP (Intel-based CPU)
Moed14.gsd
EU5C-SWD-DP (Motorola-based CPU)
MoeId14.gsd
￫
These and other fieldbus description files can be found on the
Internet at:
http://www.eaton.de/EN/EatonDE/ProdukteundLoesungen/Electrical/
Kundensupport/index.htm
￫ Customer support ￫ Download Center – Software
To Next Page
Loading...
Need help?
General
Weight and Dimensions
