Eaton DS7 - Terminal Capacity, Control Cables, Actuating Circuit

9 Appendix
9.3 Specific technical data
DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com 217
9.3.2 Terminal capacity, control cables, actuating circuit
The following technical data depends on size.
Size Unit Frame size 1:
4 - 12 A
Frame size 2:
16 - 32 A
Frame size 3:
41 - 100 A
Frame size 4:
135 - 200 A
General
Dimensions (W x H x D) mm 45 x 130 x 95 45 x 150 x 118 93 x 175 x 139 108 x 215 x 178
Weight kg
0.35 0.4 1.8 3.7
Terminal capacity
Cables
(box terminal)
Solid mm
2
1 x (0.75 - 4)
2 x (0.75 - 2.5)
1 x (0.75 - 16)
2 x (0.75 - 10)
1 x (25 - 70)
2 x (6 - 25)
1 x (4 - 185)
2 x (4 - 70)
Flexible with ferrule mm
2
1 x (0.75 - 2.5)
2 x (0.75 - 2.5)
1 x (0.75 - 16)
2 x (0.75 - 10)
Stranded mm
2
1 x 16
2 x 16
1 x (25 - 70)
2 x (6 - 25)
1 x (4 - 185)
2 x (4 - 70)
Solid or stranded AWG
1 x (18 - 10)
2 x (18 - 10)
1 x (14 - 8)
2 x (14 - 8)
1 x (12 - 2/0) 1 x (12 - 350 mcm
2 x (12 - 00)
Flat conductor
minimum mm 2 x 9 x 0.8 2 x 9 x 0.8
maximum mm
9 x 9 x 0.8 10 x 16 x 0.8
Tightening torque Nm
1.2 3.2 9 (> 10 mm²)
6 (≦ 10 mm²)
14 (> 10 mm²)
5 (≦ 10 mm²)
Control cables
Solid mm
2
1 x (0.75 - 4)
2 x (0.75 - 2.5)
1 x (0.75 - 4)
2 x (0.75 - 1.5)
1 x (0.75 - 4)
2 x (0.75 - 1.5)
1 x (0.75 - 4)
2 x (0.75 - 1.5)
Flexible with ferrule mm
2
1 x (0.75 - 2.5)
2 x (0.75 - 2.5)
1 x (0.75 - 2.5)
2 x (0.75 - 1.5)
1 x (0.75 - 2.5)
2 x (0.75 - 1.5)
1 x (0.75 - 2.5)
2 x (0.75 - 1.5)
Stranded mm
2
Solid or stranded AWG 1 x (18 - 10)
2 x (18 - 10)
1 x (18 - 14)
2 x (18 - 16)
1 x (18 - 14)
2 x (18 - 16)
1 x (18 - 14)
2 x (18 - 16)
Tightening torque Nm
1.2 0.6 0.6 0.6
Screwdriver (flat blade) mm
0.6 x 3.5 0.6 x 3.5 0.6 x 3.5 0.6 x 3.5
Actuating circuit
Relay outputs
Number 1 (TOR) 2 (TOR,
RUN/READY)
1)
2 (TOR,
RUN/READY)
1)
2 (TOR,
RUN/READY)
1)
Max. voltage range V AC/DC = U
s
250 250 250
Max. load current A
1 1 1 1
1) Does not apply for soft starter DS7 with SmartWire-DT (DS7-…-D).