1 Device series DS7
1.1 Front View
DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com 11
1 Device series DS7
1.1 Front View
The following two devices are used as examples of the DS7 series:
• DS7-340SX032N0-N (left) – without SmartWire-DT interface
• DS7-34DSX032N0-D (right) with SmartWire-DT interface
1.2 Features
DS7 series soft starters comply with the IEC/EN 60947-4-2 product standard
and are provided with the following standard features:
Table 2: Features of the DS7 soft starters
Figure 1: Front view of DS7 soft starter
Left: Without SmartWire-DT interface
Right: With SmartWire-DT interface
Feature Instance
Compact design ✓
Adjustable start voltage
✓
Separately adjustable ramp times for start and stop
✓
Digital inputs
✓ 1 (size 1), 2 (size 2, size 3, size 4)
Relay output
✓ 1 (size 1), 2 (size 2, size 3, size 4)
Standard controller card and parameters over the entire performance range
✓
Communication
✓ via SmartWire-DT (with types DS7-34D…-D)