1. ELC Concepts
MN05003003E For more information visit: www.eaton.com
1-13
OR operation upward is not allowed.
Reverse current
“Reverse current” flow is not allowed.
Output should be connected on top of the circuit.
Block combination should be made on top of the
circuit.
Parallel connection without an instruction is not
allowed.
Parallel connection without an instruction is not
allowed.
No instruction in the middle block is not allowed.
Instructions and blocks in series should be
horizontally aligned
Label P0 should be at the first row of the
complete network.
“Reverse current” exists
To Next Page
Loading...
