Eaton ELC-PB - B.3 Error Detection Addresses

ELC Programming Manual
For more information visit: www.eaton.com MN05003003E
B-8
B.3 Error Detection Addresses
Error Check
Address
Description Drop Latch STOP Æ RUN RUN Æ STOP
M1067 Program execution error flag None Reset Latch
M1068 Execution error latch flag None Latch Latch
D1067 Algorithm error code None Reset Latch
D1068 Step value of algorithm errors None Latch Latch
D1067
Error Code
Description
0E18 BCD Conversion Error
0E19 DIVISION (divisor=0)
0E1A Floating Point exceeds the usage range
0E1B The value of square root is negative