Eaton Ellipse PRO 650 FR - Page 6

5
614-06817-00
Technical characteristics
Performances tested according to IEC 61643-1 (class 3) standard for 8/20 µs surge wave
(*) Warning:
Output cables should not exceed 10 m length.
Ellipse PRO 650 850 1200 1600
• UPS power 650 VA /
400 W
850 VA /
510 W
1200 VA /
750 W
1600 VA /
1000 W
•Nominalinputvoltage 165 V - 264 V, adjustable to 150 V - 284 V
•Input frequency 50/60 Hz (46 - 70 Hz working range)
• Voltage/frequency of battery backup
outlets
19
in battery mode
220 V / 230 V / 240 V +15 % -20 % (50/60 Hz ± 1 Hz)
•Total output current for all outlets 10 A max
• Output current of battery backup
outlets
19
3 A max 3.6 A max 5.5 A max 7.3 A max
•Leakage current 0.4 mA
•Input protection 10 A resettable circuit breaker
•Transfer time 5 ms typical
•Telephone/Data surge protection Tel,ISDN,ADSL,Ethernet
•Sealed lead-acid battery 12 V, 7 Ah 12 V, 9 Ah 2x12V, 7 Ah 2x12V, 9 Ah
•Automatic battery test Once a week
•Average battery life 4 years typical, depending on temperature and number of discharge
cycles
•Operating temperature 0 to 35 °C
•Storage temperature -25 °C to +55 °C
•Operating relative humidity 0 to 85 %
•Operating elevation 0 to 2000 m
•Safety standards IEC62040-1,CEcertied
•Electromagnetic compatibility standards IEC 62040-2, C1*
•Warranty 3 years
•Dimensions (mm/inch) 260 x 82 x 285 / 10.24 x 3.23 x 11.22 275 x 82 x 390 / 10.83 x 3.23 x 15.35
•Weigth (kg/lb) 6.9 / 15.2 7.3 / 16.1 9.7 / 21.4 11.5 / 25.4
AC input source protection, Ellipse PRO: 650 850 1200 1600
•Uoc (common mode / differential mode) 6 kV / 2 kV
•Up (common mode / differential mode) 1.5 kV / 1 kV
•In 3 kA
Dielectric isolation
•AC Ground 1500 Vac, 50 Hz
•AC / TEL 3000 Vac, 50 Hz
•Tel / Ground 1000 Vac, 50 Hz
Temporary overvoltage (TOV)
•Uc 250 Vac
•Ut 430 Vac
Energy dissipation
405 Joules