Eaton FD120 - Page 3

NOTES:
1. All enclosures finished in FirePump red.
2. Cable Entrance bottom only.
3. Standard Enclosure type NEMA 2
4. Enclosure made from #14 Gauge (0.75) HR Steel.
5. Feet are removable.
* NEMA 4, 4X enclosures are supplied:
With 1/4 Turn latches instead of a standard handle.
Dimensions
Diesel Plus Engine Controller
Technical Data MD081013EN
Standard Enclosure - Type NEMA 2, 3R, (*4, 4X), 12
E ective April 2015
Approximate Weight
Lbs. (Kg)
105 (48)
1 - DIESEL PLUS MEMBRANE
2 - LOCKABLE HANDLE
3 - HAND OFF AUTO SELECTOR SWITCH
4 - STOP BUTTON
5 - CRANK BUTTONS
6 - AUDIBLE ALARM
7 - DC FAIL LIGHT
8 - DISCHARGE 1/4" NPT - FEMALE
9 - SENSING LINE 1/2" NPT - FEMALE
10 - ALLOWABLE CABLE ENTRY/EXIT AREA
13.11 [333]
26.72 [679]
7.00 [178]
15.00 [381]
19.19 [487]
2.00 [51]
32.98 [838]
34.98 [888]
18.00 [457]
52.98 [1346]
10.56 [268]
1.23 [31]
1.14 [29]
5.75 [146]
10.29 [261]3.32 [84]
1.37 [35]
3.42 [87]
8.00 [203]
4.85 [123]
5.32 [135]
INTERLOCK ON
SPEED SWITCH FAULT
ECM SELECTOR IN ALT POSITION
FUEL INJECTION MALFUNCTION
LOW FUEL
LOW SUCTION PR ESSURE
LOW OIL PRESSURE
ENGIN E OVERSPEED
HIGH ENGINE TEMPERATURE
LOW ENGINE TEMPERATURE
LOW RAW WATER FLOW
FUEL SPILL
ENGINE RUN
REMOTE START
DELUGE VALVE
LOW PRESSURE
FAIL TO START
CHARGER #1 FAILURE
CHARGER #2 FAILURE
BATTERY #1 FAILURE
BATTERY #2 FAILURE
ECM WARNING
ECM FAILURE
HIGH R AW WATER TEMP.
SILENCE
ALARM
ENGINE
TEST
DATA
PRINT
LAMP
TEST
RESET
SAVE/EXIT
ACK.
MENU
CE16196H01
INTERLOCK ON
SPEED SWITCH FAULT
ECM SELECTOR IN ALT POSITION
FUEL INJECTION MALFUNCTION
LOW FUEL
LOW SUCTION PR ESSURE
LOW OIL PRESSURE
ENGIN E OVERSPEED
HIGH ENGINE TEMPERATURE
LOW ENGINE TEMPERATURE
LOW RAW WATER FLOW
FUEL SPILL
ENGINE RUN
REMOTE START
DELUGE VALVE
LOW PRESSURE
FAIL TO START
CHARGER #1 FAILURE
CHARGER #2 FAILURE
BATTERY #1 FAILURE
BATTERY #2 FAILURE
ECM WARNING
ECM FAILURE
HIGH RAW WATER TEMP.
SILENCE
ALARM
ENGINE
TEST
DATA
PRINT
LAMP
TEST
RESET
SAVE/EXIT
ACK.
MENU
CE16196H01
8.48 [215]
3.50 [89]
7.00 [178]
2.00 [51]
3.53 [90]
4
3
8
9
10
7
1
2
6
5