10
Range Shift
The Range Selector lever is used to select Deep, LO or HI range. It is used once during an
upshift sequence and once during a downshift sequence.
Pre-select
IMPORTANT: Always pre-select all range shifts when upshifting or downshifting. Pre-
selection requires that the Range Selector lever is moved to the needed position before
starting the lever shift.
Pre-selected range shifts are completed automatically as the lever is moved through neutral
and into the next gear position. Pre-selecting all range shifts prevents damage to the
transmission range synchronizers and provides for smoother shifts.
Transmission Features
To Next Page
Loading...
