38
PXR trip unit and communication modules
MAGNUM PXR PRODUCT GUIDE PA013006EN September 2022 www.eaton.com
3
Power Xpert Protection Manager
software (PXPM)
Eaton’s Power Xpert Protection Manager (PXPM) is a
Microsoft
®
Windows
®
-based software that can be used to
monitor, configure, control and test Eaton PXR 20/25 trip
units. The PXPM software and PXR trip unit, in conjunc-
tion, are designed to make it easier for customers to
access breaker health information, conduct diagnosis
and troubleshooting activities, verify settings, as well as
perform testing.
Hardware requirements
•
Eaton PXR 20/25 trip unit
•
USB-A to Micro-B USB cable
Software requirements:
•
Microsoft Windows 10 (32-bit or 64-bit)
•
Adobe
®
Acrobat
®
Reader (version 5 or higher)
•
Screen resolution: 1280x1024 pixels or higher
To download the software, go to the link
http://www.eaton.com/PXPM. The PXPM download link
for your computer requirements will be found on the web
page.
Upon starting PXPM, the user will be presented with
the main dashboard shown in Figure 39. This dashboard
allows users to navigate a range of capabilities varying
from configuring trip unit settings to performing remote
control and test functions.
A summary of PXPM capabilities and features include:
•
Perform Secondary Injection Testing, no test kit required
•
Perform a continuity test of the sensors
•
Zone Selective Interlocking testing
•
Printable field reports
•
Waveform capture for troubleshooting and diagnostics
•
Time Current Curve (TCC) by setting
•
Set point storage
•
Easy to navigate through graphical interfaces
•
Program Settings
•
Settings can be developed and stored offline when not
connected to a trip unit
Figure 39. PXPM main dashboard
To Next Page
Loading...
