Eaton 30 kVA Mini Power Distribution Unit Installation and Operation Manual 164001117—Rev 01 13
1. To make the best use of cable space and keep cables orderly, connect cables to the top row of receptacles
first, then each lower row successively.
2. Select an appropriate cable for the server and connect it to server input power.
3. Run the cable down the Cable Ladder, securing it to the Cable Ladder.
4. Run the cable through the Cable Entry Brush Panel to the correct output receptacle.
5. Connect to the receptacle and lock.
Figure 8. Cable Servers to Mini PDU
Power Cabling
To Next Page
Loading...
