Need help?Do you have a question about the Eaton Managed ePDU and is the answer not in the manual?
General| Brand | Eaton |
|---|---|
| Model | Managed ePDU |
| Category | Power distribution unit |
| Language | English |
Details the features and capabilities of all Managed ePDU models.
Lists the equipment and materials included in each ePDU model package.
Essential instructions for safe installation and operation of the ePDU.
Critical warnings regarding lethal voltages and essential safety precautions.
Instructions for establishing a serial connection for ePDU configuration.
Steps to connect the ePDU to a network via LAN or serial configuration.
Procedure to restore the ePDU to its original factory default settings.
Description of the ePDU's front panel components, including LEDs and ports.
Details on the ePDU's outlets, including LED status interpretations.
Guide on using the ePDU's LED display panel to view outlet information.
Steps to access and log into the ePDU's web-based administration interface.
Instructions for modifying the user password through the web interface.
Overview of the information displayed in the interface's status panel.
Description of the ePDU's home page layout and key sections.
Details on viewing the list of ePDU outlets and their status.
Procedure for controlling individual outlet power states via the web interface.
Guide on creating and managing user profiles for accessing the ePDU.
Instructions for configuring system-level permissions for user groups.
Steps to enable and configure the ePDU's network firewall settings.
Process for configuring alerts to notify administrators of system events.
Guide for setting up SNMP communication to send traps to a manager.
Information on combining outlets from multiple ePDUs into logical groups.
Introduction to the Command Line Protocol (CLP) interface for ePDU administration.
Methods for accessing the ePDU via HyperTerminal, Telnet, or SSH.
Commands to display outlet status, name, and associated sensors via CLP.
Overview of IPMI commands for channel information and authentication.
IPMI commands for configuring LAN parameters like IP address and security.
IPMI commands to display and manage sensor readings and thresholds.
IPMI commands for managing specific ePDU operations and settings.
Steps to enable the SNMP agent for communication with SNMP managers.
Procedure to configure the ePDU to send SNMP traps for event notifications.
To Next Page
