Eaton PDI WaveStar TFA Static Transfer Switch Installation and Operation Manual P-164001113—Rev 01 85
CChhaapptteerr 1122 SSyysstteemm SSeettuupp:: NNeettwwoorrkkiinngg
The parameters for networking options are mainly found on the Settings screen. The STS has several
networking options, which can all be used simultaneously.
In addition, the STS has multiple methods to provide summary alarm notifications, including by email. Dry
contacts provide a separate means of communication, using the Contractor Boards (See
Chapter 7 Customer Communications Connections).
1122..11 SSeettttiinnggss SSccrreeeenn
Touch the Settings button on the Home screen to display the Settings Screen (See Figure 48).
The Settings screen has panels for Modbus RTU, Ethernet, manual Time setting, and the Home screen banner
heading.
Figure 48. Networking Settings Screen
Modbus Settings This Panel is used to set parameters for Modbus RTU: Modbus address, baud rate, and
parity. The Modbus address can be changed by touching the Address button. This will display the Keyboard
Screen for entering the address for the unit. Pressing the other buttons in this panel will allow for the
adjustment of those fields. The parity can be selected from the following: Even (E), Odd (O) or None (N).
To Next Page
Loading...
