28
Step 4 - Start-up
POWERXL DM1 SERIES ADJUSTABLE FREQUENCY DRIVES PUB53696—August 2020 www.eaton.com
Table 6. Start-up wizard instructions (Cont.).
Minimum value:
0
Maximum value:
9999
Default value:
0
Description:
The keypad can be protected against unauthorized changes with the keypad lock function after no keys are pressed after five minutes.
When the password function is enabled, the user will be prompted to enter a password before the keypad display parameter or response
to key press except up/down/left/right.
By default, the password function is not in use. If you want to activate the password, change the value of this parameter to any number
between 1 and 9999.
To deactivate the password, reset the parameter value to 0.
P11.6 .1
Blue tooth enabled
ID 1895
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Disabled; or
1 = Enable.
Description:
Blue tooth enable.
a
Parameter value can only be changed after the drive has stopped.
b
Parameter value will be set to be default when changing macros.
Now the Start-up Wizard is done. It will not show again at the next power up. If you want to reset it, please select it from
the main menu (“Start-up Wizard”).
The PID Mini-Wizard is activated in the Quick Setup menu.
To Next Page
Loading...
